Ceredas Tracheostomapflaster Cyranose
The Cyranose system is a comprehensive rehabilitation system (tracheostoma plasters, HME-L filters, tracheal cannulas, tracheostoma valve) for laryngectomees that was developed in France by a laryngectomised patient. At the heart of the Cyranose is a reusable HME filter with a secretion trap that is introduced in section HME-L. The Cyranose system uses as a reusable base as the tracheostoma plaster that is attached to the skin with a double-sided adhesive ring. The base is available in 4 shapes (round A2, semi-oval E2, transverse-oval G2 and longitudinal-oval D2). The adhesive rings are available with standard adhesion (regular) and in a skin-friendly version (sensitive). Ceredas recommends leaving the base on the skin for no longer than 24 hours, and leaving a short break before reapplication in order to give the skin a chance to rest. The base is cleaned with soapy water, then rinsed and dried. It must not be cleaned with solvents.
The lifetime of the base is given as 12 months under normal use and conditions. All Cyranose products are one-patient products.
NOTE: At 35mm, the connector ring in the base of the tracheostoma plaster is much bigger than the widely used 22mm connector for laryngectomy aids. Aids of 22mm diameter can be connected using an adapter.
Preparing the A2 base for adhesion
Cleaning the A1 base after removal
Plaster name | Length/width in mm | Use recommended by manufacturer |
---|---|---|
CEREDAS Cyranose Base A2 | 71/71 | |
CEREDAS Cyranose Base D2 | Distribution only in France | |
CEREDAS Cyranose Base E2 | 71/91 | |
CEREDAS Cyranose Base G2 | Distribution only in France | |
Adhesive ring sensitive | Hypoallergenic adhesive ring for sensitive skin | |
Adhesive ring regular | Adhesive ring with strong adhesion for normal skin |